This bald eagle is a giant not only in the air. On your roof, it is a majesty.
Suitable on each ridge tile and it´s easy to install.
You can get the bald eagle in different colors. Complete black, brown or brown with white head.
Choose the color of the bald eagle while your ordering.
Unfortunately, the eagle is so oversized, that we need to send it with a pallet company.
We are sorry that this will be so monstrously expensive.
But the bald eagle is out of clay, and can´t fly to you himself
Height: 50 cm 19.68''
Wingspan: 105 cm 41.33''
view all images of bald eagle
Included in delivery:
Bald eagle figure, mounting screws, 2 threaded rods, instructions
The Ridge tile is not part of delivery
To find your shipping cost you have to register, choosing your currency and put the figure in the shopping cart.
Then klick "checkout"
How to install Roof figures
Install the bald eagle:
Drill two holes in space from thread rod through the rifge tile and the rooftop bar.
Turn the thread rods not to tight in eagles bottom. Then put the eagle on ridge tile like on image.
Bolt the bald eagle with washer and nuts below the rooftop bar. If required, cut the thread rod
The position of the bald eagle is selectable free on ridge tiles. If the radius from ridge-tile is to small, fill up the cavity with mortal. Do this also with square ridge-tiles. But don´t use silicone for this work !! Work completed..... |
Recommended products:
 |
Eagle for ridge tile made in GermanyEagle small Clay with glaze Made in Germany 420,03 ¤ |
